Por favor, use este identificador para citar o enlazar este ítem: http://repositorio.utc.edu.ec/handle/27000/10552
Registro completo de metadatos
Campo DC Valor Lengua/Idioma
dc.contributor.advisorPesantez Palacios, Gabriel Napoleón-
dc.contributor.authorVerdezoto Zurita, Brayan Steeven-
dc.date.accessioned2023-07-04T19:14:37Z-
dc.date.available2023-07-04T19:14:37Z-
dc.date.issued2023-
dc.identifier.citationBrayan Steeven Verdezoto Zurita (2023); Análisis del comportamiento de la red de energía eléctrica de distribución de la empresa ELEPCO S.A. incorporando al sistema generación distribuida mediante el software OPENDSS. UTC. Latacunga 118 p.es_ES
dc.identifier.otherPI-002441-
dc.identifier.urihttp://repositorio.utc.edu.ec/handle/27000/10552-
dc.descriptionThis document carries out the analysis of the incorporation of distributed generation in the network of the Cotopaxi Electric Company (ELEPCO 6$.A.), with the purpose of determining the behavior of the system, before the introduction of photovoltaic systems located in the substations . The systems analyzed are of the radial type working at a level of 13.8 kV. With this intention, we start from the general single-line diagram belonging to the company ELEPCO S.A., later the modeling of the distribution system network was established in the OpenDSS software. Next, the electrical network was validated taking the simulated system in Power Factory as a reference. Once the system was validated, we proceeded to determine the points where photovoltaic systems can be introduced, for which both solar radiation and the physical space for the installation are considered.es_ES
dc.description.abstractEl presente documento realiza el análisis de la incorporación de generación distribuida en la red de la Empresa Eléctrica de Cotopaxi (ELEPCO 6$.A.), con el propósito de determinar el comportamiento del sistema, ante la introducción de sistemas fotovoltaicos ubicados en las subestaciones. Los sistemas analizados son del tipo radiales trabajando a un nivel de 13.8 kV. Con esta intención partimos del diagrama unifilar general perteneciente a la empresa ELEPCO S.A., posteriormente se estableció el modelamiento de la red del sistema de distribución en el software OpenDSS. Seguidamente se validó la red eléctrica tomando como referencia el sistema simulado en Power Factory. Una vez validado el sistema se procedió a determinar los puntos en donde se puede introducir sistemas fotovoltaicos, para ello se consideran tanto la radiación solar como el espacio físico para la instalación.es_ES
dc.format.extent118 páginases_ES
dc.language.isospaes_ES
dc.publisherEcuador : Latacunga: Universidad Técnica de Cotopaxi (UTC)es_ES
dc.rightsopenAccesses_ES
dc.rights.urihttp://creativecommons.org/licenses/by-nc-sa/3.0/ec/es_ES
dc.subjectGENERACIÓN DISTRIBUIDAes_ES
dc.subjectSISTEMA RADIALes_ES
dc.subjectOPTIMIZARes_ES
dc.subjectELEPCO S.A.es_ES
dc.subject.otherELECTRICIDADes_ES
dc.titleAnálisis del comportamiento de la red de energía eléctrica de distribución de la empresa ELEPCO S.A. incorporando al sistema generación distribuida mediante el software OPENDSSes_ES
dc.typebachelorThesises_ES
Aparece en las colecciones: Tesis - Ingeniería en Electricidad

Ficheros en este ítem:
Fichero Descripción Tamaño Formato  
PI-002441.pdfPROYECTOS DE GRADO A TEXTO COMPLETO10,85 MBAdobe PDFVisualizar/Abrir


Los ítems de Repositorio UTC están protegidos por copyright, con todos los derechos reservados, a menos que se indique lo contrario.