Por favor, use este identificador para citar o enlazar este ítem: http://repositorio.utc.edu.ec/handle/27000/10601
Tipo de Material: bachelorThesis
Título : Análisis morfológico del esqueleto del zorro Andino (Lycalopex Culpaeus).
Autor : Morales Regalado, Jacqueline Raquel
Director de Tesis: Molina Molina, Elsa Janeth
Descriptores: MORFOLOGÍA
ESQUELETO
LYCALOPEX CULPAEUS
Fecha de publicación : feb-2023
Ciudad: Editorial: Ecuador : Latacunga: Universidad Técnica de Cotopaxi (UTC)
Citación : Morales Regalado Jacqueline Raquel (2023); Análisis morfológico del esqueleto del zorro Andino (Lycalopex Culpaeus). UTC. Latacunga. 111 p.
metadata.dc.format.extent: 111 páginas
Resumen : El zorro andino (Lycalopex Culpaeus) es un cánido, el cual sobresale entre las demás especies de zorros sudamericanos por ser uno de los más grandes y poseer un cráneo de tipo dolicocéfalo, para su análisis se realizó una comparación con un canino (canis lupus familiaris) poseedor del mismo tipo de cráneo; ya que actualmente el estudio morfológico de esta especie (lycalopex culpaeus) no existe, y al compararlo con el canino (canis lupus familliaris) pudimos establecer características de importancia para el estudio, que hacen única a esta especie. El objetivo general del proyecto fue “Analizar la morfología esquelética del Zorro Andino (Lycalopex culpaeus) en comparación con un Canino dolicocéfalo (Canis lupus familiaris), mediante el uso de un esqueleto de cada especie para la identificación de las características únicas del Zorro Andino (Lycalopex culpaeus)”. Para la toma de medidas se estableció puntos craneales, caudales o proximales, distales; dependiendo del tipo de hueso a tratar. Obteniendo medidas tanto de largo como de ancho que sean útiles para la comparación entre estas dos especies. Se obtuvo así diferencias significativas tanto en el cráneo, miembro locomotor torácico y miembro locomotor pelviano; en donde las que se dan a denotar son en el maxilar superior e inferior, el cual le provee de una mejor mordida al animal ayudándole con su desenvolvimiento alimenticio. En el hueso frontal por su parte más craneal se observó que es más estilizada y alargada logrando así que termine con una forma arciforme en la protuberancia occipital. Los esqueletos tanto del zorro andino (Lycalopex culpaeus) como el del canino dolicocéfalo (Canis lupus familiaris) se parecen en muchos aspectos. Los dos son de cráneo tipo dolicocéfalos, pertenecen a la misma familia canidae, las estructuras de sus huesos son muy similares, las características que las diferencian son mínimas. Finalizamos demostrando que las medidas obtenidas de los huesos del zorro andino (Lycalopex culpaeus) comparadas con la de un canino dolicocéfalo (canis lupus familiaris) no difirieron mucho entre si dando lugar a lo que se menciona en el fundamento científico que esta especie de zorro es el más grande de los zorros sudamericanos.
Descripción : The Andean fox (Lycalopex culpaeus) is a canid, which stands out among the other South American fox species for being one of the largest and having a dolichocephalic skull, for its analysis a comparison was made with a canine (canis lupus familiaris) with the same type of skull; since currently the morphological study of this species (lycalopex culpaeus) does not exist, and by comparing it with the canine (canis lupus familiaris) we were able to establish characteristics of importance for the study, which make this species unique. The general objective of the project was to analyze the skeletal morphology of the Andean fox (Lycalopex culpaeus) in comparison with a dolichocephalic canine (Canis lupus familiaris), by using a skeleton of each species to identify the unique characteristics of the Andean fox (Lycalopex culpaeus). For the taking of measurements, cranial, caudal or proximal and distal points were established, depending on the type of bone to be treated. Obtaining measurements of both length and width that are useful for the comparison between these two species. Significant differences were obtained in the skull, thoracic locomotor limb and pelvic locomotor limb; where the most significant differences were in the upper and lower jaw, which provides a better bite to the animal, helping it with its feeding development. In the frontal bone, due to its cranial part, it was observed that it is more stylized and elongated, thus achieving an arciform shape in the occipital protuberance. The skeletons of both the Andean fox (Lycalopex culpaeus) and the dolichocephalic canine (Canis lupus familiaris) are similar in many aspects. Both have dolichocephalic skulls, belong to the same family canidae, their bone structures are very similar, and the characteristics that differentiate them are minimal. We conclude by demonstrating that the measurements obtained from the bones of the Andean fox (Lycalopex culpaeus) compared with those of a dolichocephalic canine (canis lupus familiaris) did not differ much from each other, giving rise to what is mentioned in the scientific rationale that this species of fox is the largest of the South American foxes.
Aparece en las colecciones: Tesis - Medicina Veterinaria

Ficheros en este ítem:
Fichero Descripción Tamaño Formato  
PC-002697.pdfPROYECTO A TEXTO COMPLETO3,5 MBAdobe PDFVisualizar/Abrir


Este ítem está sujeto a una licencia Creative Commons Licencia Creative Commons Creative Commons