Por favor, use este identificador para citar o enlazar este ítem: http://repositorio.utc.edu.ec/handle/27000/3420
Tipo de Material: bachelorThesis
Título : Diseño e implementación del panel de transferencia automática para la distribución de energía secundaria de la Universidad Técnica de Cotopaxi – La Maná, año 2012
Autor : Mendoza Loor, Hamilton Paul
Director de Tesis: Villacrés Jirón, Mauricio Adrián
Descriptores: DISEÑO
IMPLEMENTACIÓN
TRANSFERENCIA AUTOMÁTICA
ENERGÍA SECUNDARIA
DISTRIBUCIÓN
Fecha de publicación : jun-2014
Ciudad: Editorial: LA MANÁ / UTC / 2014
Citación : Mendoza Loor, Hamilton Paul (2014). Diseño e implementación del panel de transferencia automática para la distribución de energía secundaria de la Universidad Técnica de Cotopaxi – La Maná, año 2012. Ingeniería Electromecánica. UTC. La Maná. 148 p.
metadata.dc.format.extent: 148 p.
Resumen : Un panel de transferencia automático beneficiaría el funcionamiento del grupo electrógeno en la Universidad Técnica de Cotopaxi Sede La Maná, en vista de los frecuentes cortes de energía eléctrica registrados, este sistema de emergencia se activará cuando el suministro de la red pública se vea interrumpido, y conmutará el funcionamiento del generador cuando la electricidad regrese, sin la necesidad de que intervenga el recurso humano. Previo a la implementación se estudiaron antecedentes, características, procesos de instalación y datos técnicos de los paneles de transferencia automáticos, para el correcto funcionamiento del generador. Los métodos empleados son: inductivo, por cuanto los resultados de la encuesta se generalizaran para todas las instalaciones existentes en la universidad.
Descripción : An automatic transfer panel would benefit the functioning of the electricity-generating group in Cotopaxi Technical University La Maná, given that the frequent power cuts registered, this system of emergency will be activated when the supply of the public network be interrupted, and will exchange the functioning of the generator when the electricity returns, without the need that human resource intervene. Before the implementation there were studied precedents, characteristics, processes of installation and technical information of the automatic panels of transfer for the correct functioning of the generator. The used methods were: inductive, since the results of the survey were generalized for all the existing facilities in the university; deductive, because the electrical industrial projects of assembly need study of installed loads; the method of the analysis.
Aparece en las colecciones: Tesis - Ingeniería Eletromecánica

Ficheros en este ítem:
Fichero Descripción Tamaño Formato  
T-UTC-00696.pdfTESIS A TEXTO COMPLETO2,14 MBAdobe PDFVisualizar/Abrir


Este ítem está sujeto a una licencia Creative Commons Licencia Creative Commons Creative Commons