Por favor, use este identificador para citar o enlazar este ítem: http://repositorio.utc.edu.ec/handle/27000/3561
Registro completo de metadatos
Campo DC Valor Lengua/Idioma
dc.contributor.advisorLara Landázuri, Renán Arturo-
dc.contributor.authorFigueroa Robalino, Jerson Stalin-
dc.date.accessioned2017-01-31T14:02:53Z-
dc.date.available2017-01-31T14:02:53Z-
dc.date.issued2016-07-
dc.identifier.citationFigueroa Robalino, Jerson Stalin (2016). Evaluación de la eficiencia de la planta de tratamiento de aguas residuales del sector Patoa de Izurieta y diseño de medidas de remediación. Ingeniería de Medio Ambiente. UTC. Latacunga. 109 p.es_ES
dc.identifier.urihttp://repositorio.utc.edu.ec/handle/27000/3561-
dc.descriptionThis investigation resulted in characterizing the efficiency of the waste water treatment plant of Patoa de Izurieta in the Pujilí Canton for the purpose of designing measures to remediate impact on the environment. This was examined because, in the area around the treatment plant, the waters are discharged without adequate treatment. The plant’s purpose is to improve the quality of life for those inhabitants of the nearby communities and of the Patoa River. In order to accomplish this investigation, several activities were undertaken, including the characterization of waste water entering and leaving the plant, water sampling from the analysis based on regulation NTE INEN 2169:98., by a laboratory accredited by SAE, The what determines efficiency of the units of treatment at the global level was previously determined. Based on the formula, it was possible to determine that the treatment plant does not meet adequate efficiency with a general average of 3%, due to the analyzed parameters exceeding the permissible limits and the treatment units not accomplishing their function of water sanitation.es_ES
dc.description.abstractLa presente investigación tuvo como finalidad caracterizar la eficiencia de la planta de tratamiento de aguas residuales Patoa de Izurieta, Cantón Pujilí, de esta manera se diseñó medidas de remediación para mitigar los impactos ambientales. Esta se realizó debido a que en el sector en donde se encuentra la planta de tratamiento descargan las aguas servidas sin un tratamiento adecuado. El objetivo de la planta es mejorar la calidad de vida de los habitantes de las comunidades aledañas y al rio Patoa. Para cumplir con este fin se realizó varias actividades entre ellas: la caracterización de las aguas residuales entrantes y salientes, mediante el muestreo de agua de los análisis en base a la normativa NTE INEN 2169:98, con un laboratorio acreditado por el SAE. Posteriormente se realizó la determinación de la eficiencia a nivel global de las unidades de tratamiento.es_ES
dc.format.extent109 p.es_ES
dc.language.isospaes_ES
dc.publisherLATACUNGA / UTC / 2016es_ES
dc.rightsopenAccesses_ES
dc.rights.urihttp://creativecommons.org/licenses/by-nc-sa/3.0/ec/es_ES
dc.subjectEFICIENCIAes_ES
dc.subjectCARACTERIZACIÓNes_ES
dc.subjectREDISEÑOes_ES
dc.subjectPLANTA DE TRATAMIENTOes_ES
dc.subjectAGUAS RESIDUALESes_ES
dc.titleEvaluación de la eficiencia de la planta de tratamiento de aguas residuales del sector Patoa de Izurieta y diseño de medidas de remediaciónes_ES
dc.typebachelorThesises_ES
Aparece en las colecciones: Tesis - Ingeniería en Medio Ambiente

Ficheros en este ítem:
Fichero Descripción Tamaño Formato  
T-UTC-00798.pdfTESIS A TEXTO COMPLETO1,83 MBAdobe PDFVisualizar/Abrir


Este ítem está sujeto a una licencia Creative Commons Licencia Creative Commons Creative Commons