Por favor, use este identificador para citar o enlazar este ítem: http://repositorio.utc.edu.ec/handle/27000/4048
Tipo de Material: bachelorThesis
Título : Reparación de los sistemas eléctricos de generación en la pequeña central hidroeléctrica la calera del cantón Mejía
Autor : Orbea Angueta, Edison Marcelo
Director de Tesis: Espinel Cepeda, Carlos Alfredo
Descriptores: DISYUNTOR
PROTECCIÓN
FALLA
ELECTRICIDAD
Fecha de publicación : 2017
Ciudad: Editorial: LATACUNGA / UTC / 2017
Citación : Orbea Angueta, Edison Marcelo (2017). Reparación de los sistemas eléctricos de generación en la pequeña central hidroeléctrica la calera del cantón Mejía. Ingeniería Electromecánica. UTC. Latacunga. 111 p.
metadata.dc.format.extent: 111 p.
Resumen : La central hidroeléctrica La Calera consta de tres unidades de generación de marca Brown Boveri de eje horizontal que, por restricciones técnicas, no se encontraban operativas. Dichas restricciones de carácter eléctrico, se debieron a que las protecciones eléctricas se encontraban inoperativas y los interruptores de media tensión se encontraban deteriorados. El objetivo principal fue reemplazar los elementos de conmutación entre los generadores con la red eléctrica, además de instalar elementos de protección contra fallas de sobre corriente y protecciones contra bajo y alto voltaje, garantizando una maniobrabilidad segura en los 3 generadores eléctricos. El aporte más importante realizado es sin duda la puesta en operación de las máquinas para generar energía, incorporando dispositivos de protección eléctrica con su respectivo instructivo de operación, manuales y otros documentos importantes para el correcto funcionamiento de la central hidroeléctrica, adicionalmente los planos de conexión y cableado de cabinas de disyuntores y cabinas de excitación....
Descripción : La Calera hydroelectric plant consists of three units for generating energy of horizontal axis Brown Boveri brand that, due to technical constraints, were not operational. These electrical restrictions were due to the fact that the electrical protections were inoperative and the voltage switches of the means were deteriorated. The main principle was to replace the switching elements between the generators with the electric red, in addition to installing the protection elements against current faults and protections against low and high voltage, guaranteeing a safe maneuverability in the 3 electric generators. The most important design in undoubtedly the commissioning of machines for the generation of energy, incorporating electrical protection devices with their respective operating instructions, manuals and other documents important for the correct operation of the hydroelectric plant, in addition the planes connection and cabling of circuit breaker booths and excitation booths. Highlight from the head that each of the wires, control elements and protection according to the drawings are labeled. In order to be able to clearly identify each of the circuits that connects the system components and thus determines possible faults in a rapid way....
Aparece en las colecciones: Tesis - Ingeniería Eletromecánica

Ficheros en este ítem:
Fichero Descripción Tamaño Formato  
T-UTC-0235.pdfTESIS A TEXTO COMPLETO6,87 MBAdobe PDFVisualizar/Abrir


Este ítem está sujeto a una licencia Creative Commons Licencia Creative Commons Creative Commons