Por favor, use este identificador para citar o enlazar este ítem: http://repositorio.utc.edu.ec/handle/27000/4701
Registro completo de metadatos
Campo DC Valor Lengua/Idioma
dc.contributor.advisorCervantes, Lilia-
dc.contributor.authorBracho Pasquel, Pablo Andrés-
dc.date.accessioned2018-09-27T19:51:52Z-
dc.date.available2018-09-27T19:51:52Z-
dc.date.issued2018-08-
dc.identifier.citationBracho Pasquel, P. A. (2018). Sistema de gestión de desechos lubrcantes en la Micro Empresa electro-service del Barrio San Felipe; una contribución a la disminución del impacto ambiental. Ecuador: Ecuador : Universidad Técnica de Cotopaxi; Unidad Académica de Ciencias de la Ingeniería y Aplicadas; Carrera de Ingeniería Industrial, 2018es_ES
dc.identifier.urihttp://repositorio.utc.edu.ec/handle/27000/4701-
dc.descriptionThe purpose of the research project is the design of a lubricant waste management system in the micro-enterprise Electro-Service of the San Felipe neighborhood, which will contribute to the reduction of the environmental impact of the sector, due to the production of waste from this sector. place, which has grown significantly thanks to the increase in jobs dedicated to automotive mechanics in general, is that approximately 20 small companies are dedicated to this activity, which do not have an environmental management system, aspect that aggravates environmental pollution , specifically the causes of the Yanayacu River, because of the discharges of the used lubricants. To establish the design parameters of the lubricant waste management system, the hypothetical deductive method will be used, which will allow logical consequences, based on general knowledge, through observation of the workplace of the microenterprise. To characterize it, it is necessary to prepare a SWOT Matrix and a survey addressed to the service personnel of Electro-Service, in order to know the state in which the entity is operating, which evidenced that there is currently no management system of lubricant waste, therefore the improper handling of the same, representing a risk to the environment and the health of the personnel that handles this type of waste. Through the Leopold Matrix, a negative impact of -7 / + 7 was obtained, due to the productive activity in the soil, water and air factors. Once the current situation of the microenterprise has been defined, a lubricant waste management system based on the ISO 14001: 2015 Standard is proposed, which allows the correct management and storage of the lubricant waste.es_ES
dc.description.abstractEl proyecto de investigación tiene como finalidad el diseño de un sistema de gestión de desechos lubricantes en la microempresa Electro-Service del barrio San Felipe, mismo que será una contribución a la disminución del impacto ambiental del sector, debido a la producción de desechos de este lugar, que ha crecido significativamente gracias al incremento de trabajos dedicados a la mecánica automotriz en general, es así que aproximadamente 20 empresas pequeñas, están dedicadas a esta actividad, mismas que no cuentan con un sistema de gestión ambiental, aspecto que agrava la contaminación ambiental, específicamente los causes del río Yanayacu, a causa de los vertimientos de los lubricantes usados. Para establecer los parámetros de diseño del sistema de gestión de desechos lubricantes, se utilizará el método hipotético deductivo, que permitirá llegar a consecuencias lógicas, a partir de conocimientos generales, mediante la observación del lugar de trabajo de la microempresa. Para caracterizarla es necesario la elaboración de una Matriz FODA y una encuesta dirigida al personal de servicio de Electro-Service, para conocer el estado en el que se encuentra operando dicha entidad, mismos que evidenciaron que la actualmente no se cuenta con un sistema de gestión de desechos lubricantes, por ende el manejo indebido de los mismos, representando un riesgo para el ambiente y la salud del personal que maneja este tipo de desechos. Mediante la Matriz de Leopold, se obtuvo un impacto negativo de -7/+7, por motivo de la actividad productiva en los factores suelo, agua y aire. Una vez definida la situación actual de la microempresa se plantea un sistema de gestión de desechos lubricantes basado en la Norma ISO 14001:2015, que permita el correcto manejo y almacenamiento de los desechos lubricantes.es_ES
dc.description.sponsorshipUNIVERSIDAD TÉCNICA DE COTOPAXIes_ES
dc.format.extent114 páginases_ES
dc.language.isospaes_ES
dc.publisherLatacunga: Universidad Técnica de Cotopaxi.es_ES
dc.rightsopenAccesses_ES
dc.rights.urihttp://creativecommons.org/licenses/by-nc-sa/3.0/ec/es_ES
dc.subjectSISTEMA DE GESTIÓNes_ES
dc.subjectDESECHOSes_ES
dc.subject.otherLUBRICANTESes_ES
dc.subject.otherIMPACTO AMBIENTALes_ES
dc.titleSistema de gestión de desechos lubricantes en la Micro Empresa Electro-Service del barrio San Felipe, una contribución a la disminución del impacto ambiental.es_ES
dc.typebachelorThesises_ES
Aparece en las colecciones: Tesis - Ingeniería Industrial

Ficheros en este ítem:
Fichero Descripción Tamaño Formato  
PI-000801.pdfPROYECTO DE GRADO A TEXTO COMPLETO2,18 MBAdobe PDFVisualizar/Abrir


Los ítems de Repositorio UTC están protegidos por copyright, con todos los derechos reservados, a menos que se indique lo contrario.