Por favor, use este identificador para citar o enlazar este ítem: http://repositorio.utc.edu.ec/handle/27000/6822
Registro completo de metadatos
Campo DC Valor Lengua/Idioma
dc.contributor.advisorMarrero Ramírez, Secundino, PhD.-
dc.contributor.authorPardo Solano, Franklin Vladimir-
dc.contributor.authorCasa Yanguicela, Juan Carlos-
dc.date.accessioned2020-11-16T18:43:11Z-
dc.date.available2020-11-16T18:43:11Z-
dc.date.issued2020-02-
dc.identifier.citationPardo Solano. F.V. (2020) Automatización de un sistema de riego para el control de humedad en los cultivos del invernadero #2 del Centro Experimental Salache en la Universidad Técnica de Cotopaxi. U.T.C. Latacunga. 83 p.es_ES
dc.identifier.otherT-001522-
dc.identifier.urihttp://repositorio.utc.edu.ec/handle/27000/6822-
dc.descriptionThe present research project was carried out in the sector of Salache Province of Cotopaxi with the objetive of designing and implementing an automated system for the control of moisture inside a greenhouse. This allowed us to control the variable dependent on moisture that varies according to the type of crop. The automation of the system was carried out through the information that was collected through the moisture sensors located in the different sections of the crops, which recorded the moisture in the soil and proceeded to determine whether it is in the range set for the subsequent opening or closing of the solenoid valves. And at the same time the ignition of centrifugal pumps. The system consists of four solenoid valves distributed in the different sections. Two pumps of 1 Hp that will work to reach the necessary pressure, the pumps carried out the process of drip irrigation that allowed to reduce the use of water. For the selection of the automatic or manual mode, a machine human interface was incorporated too for easy user handling. The implementation of the automated system for moisture control improved the efficiency of the irrigation system, it met the main objective of the 40 PSI (pressure required for irrigation of greenhouse crops), allowed us to save the resource "Water" in 50 %. And it could be a beneficial project for students and the agricultural sector because they will be able to improve their skills in this area. With the implementation of the automated irrigation system for moisture control it was possible to find that the pressure necessary to be able to perform the misting process arrives because this pressure is 40 Psi and with the system exceeds that pressure reaching about 60 Psi.es_ES
dc.description.abstractEl presente proyecto de investigación fue realizado en el sector de Salache Provincia de Cotopaxi con el objetivo de diseñar e implementar un sistema automatizado para el control de humedad al interior de un invernadero el cual nos permitió controlar la variable dependiente humedad que varía de acuerdo al tipo de cultivo. La automatización del sistema se llevó a cabo mediante la información que fue recopilada a través de los sensores de humedad situados en las distintas secciones de los cultivos, los cuales registraron la humedad que se encuentra en el suelo y procedió a determinar si se encuentra en el rango establecido para la posterior apertura o cierre de las electroválvulas y a su vez el encendido de las bombas centrífugas. El sistema consta de cuatro electroválvulas distribuidas en las diferentes secciones, dos bombas de 1 Hp las cuales trabajarán para llegar a la presión necesaria, las bombas realizaron el proceso de riego por goteo que permitió reducir el uso del agua. Para la selección del modo automático o manual se le incorporó conjuntamente una interfaz hombre máquina para una fácil manipulación por parte del usuario. La implementación del sistema automatizado para el control de humedad mejoró la eficiencia del sistema de riego, cumplió con el objetivo principal de los 40 PSI (presión requerida para el riego de los cultivos del invernadero), nos permitió ahorrar el recurso “Hídrico” en un 50 %, y además podría ser un proyecto beneficioso para los estudiantes y el sector agrícola debido a que podrán mejorar sus habilidades en dicho ámbito. Con la implementación del sistema automatizado de riego para el control de humedad se pudo constatar que llega la presión necesaria para poder realizar el proceso de nebulización debido que dicha presión es de 40 Psi y con el sistema sobrepasa esa presión llegando a unos 60 Psi.es_ES
dc.format.extent83 páginases_ES
dc.language.isospaes_ES
dc.publisherEcuador: Latacunga: Universidad Técnica de Cotopaxi; Facultad de Ciencias de la Ingeniería y A plicadas.es_ES
dc.rightsopenAccesses_ES
dc.rights.urihttp://creativecommons.org/licenses/by-nc-sa/3.0/ec/es_ES
dc.subjectEléctricaes_ES
dc.subjectAutomatizaciónes_ES
dc.subject.otherHumedades_ES
dc.subject.otherImplementaciónes_ES
dc.titleAutomatización de un sistema de riego para el control de humedad en los cultivos del invernadero #2 del Centro Experimental Salache en la Universidad Técnica de Cotopaxi.es_ES
dc.typebachelorThesises_ES
Aparece en las colecciones: Tesis - Ingeniería Eléctrica

Ficheros en este ítem:
Fichero Descripción Tamaño Formato  
T-001522.pdf5,94 MBAdobe PDFVisualizar/Abrir


Este ítem está sujeto a una licencia Creative Commons Licencia Creative Commons Creative Commons