Por favor, use este identificador para citar o enlazar este ítem: http://repositorio.utc.edu.ec/handle/27000/6937
Registro completo de metadatos
Campo DC Valor Lengua/Idioma
dc.contributor.advisorReyes, Juan José, PhD.-
dc.contributor.authorDíaz Ayala, Karina Noemí-
dc.date.accessioned2021-01-08T22:57:53Z-
dc.date.available2021-01-08T22:57:53Z-
dc.date.issued2017-11-
dc.identifier.citationDíaz Ayala Karina Noemí, (2017); “Producción de pepino (cucumis sativus.) con dos sistemas de tutorado”. UTC. La Maná. 60 p.es_ES
dc.identifier.otherUTC-PIM-000278-
dc.identifier.urihttp://repositorio.utc.edu.ec/handle/27000/6937-
dc.descriptionThe research was carried out at the Experimental Center "La Playita", of the Technical University of Cotopaxi, in the province of Cotopaxi. (Geographic Location WGS 84: Latitude SO ° 56'27 "Longitude W 79 ° 13'25"), with height of 193 meters above sea level. The following objectives were proposed: To evaluate growth indicators in cucumber plants under two tutorial systems. To determine some production indicators in cucumber plants under two tutorial systems. To assess the feasibility of economic tutorial systems in cucumber. The experimental design used was a Completely Randomized Design (CRA), with two treatments six repetitions plus an absolute witness. The variables which were evaluated: Height of plant, number of fruits, length of fruits, diameter of fruits, weight of fruits, number of damaged fruits, and the percentage of efficiency. The results were: The highest plant was recognized at 15 days with the tutorial treatments with mesh, whit the following values of 24,81 cm, the highest number of fruits was obtained with the tutorial with 6,79, in the length of fruit the greatest value was given with the tutorial using meshes with 27,70 cm, the largest diameter of fruits the tutorial with meshes presented better results with 5,84 centimeters, the tutorial with meshes reached greater weight of fruit with 539,64, the less number of damaged fruits was registered in the tutorial implementing with meshes with 0.67 fruits in poor condition, the highest efficiency was achieved with the tutorial based on meshes, with an efficiency of 90.09%.es_ES
dc.description.abstractLa investigación se realizó en el Centro Experimental “La Playita”, de la Universidad Técnica de Cotopaxi, en la provincia de Cotopaxi. (Ubicación Geográfica WGS 84: Latitud SO°56’27” Longitud W 79° 13’25”), con altura de 193 msnm. Se plantearon los siguientes objetivos: Evaluar indicadores de crecimiento en plantas de pepino bajo dos sistemas de tutorado. Determinar algunos indicadores de producción en plantas de pepino bajo dos sistemas de tutorado. Valorar la factibilidad económica de los sistemas de tutorado en pepino. El diseño experimental utilizado fue un Diseño Completamente al Azar (DCA), con dos tratamientos seis repeticiones más un testigo absoluto. Las variables evaluadas fueron: Altura de planta, número de frutos, longitud de frutos, diámetro de frutos, peso de frutos, número de frutos dañados, y el porcentaje de eficiencia. Los resultados fueron: La mayor altura de planta a los 15 días se registró con el tratamiento tutorado con malla, registrando valores de 24,81 cm, el número de frutos más alto se obtuvo con el tutorado con 6,79, en la longitud de fruto el mayor valor se dio con el tutorado usando mallas con 27,70 cm, el mayor diámetro de frutos el tutorado con mallas presento mejores resultados con 5,84 centímetros, el tutorado con mallas alcanzó mayor peso de fruto con 539,64, el menor número de frutos dañados se registró en el tutorado implementando con mallas con 0,67 frutos en mal estado, la mayor eficiencia se logró con el tutorado a base de mallas, con una eficiencia del 90,09%.es_ES
dc.format.extent60 páginases_ES
dc.language.isospaes_ES
dc.publisherEcuador : La Maná : Universidad Técnica de Cotopaxi (UTC)es_ES
dc.rightsopenAccesses_ES
dc.rights.urihttp://creativecommons.org/licenses/by-nc-sa/3.0/ec/es_ES
dc.subjectPLANTAS DE PEPINOes_ES
dc.subjectSISTEMAS TUTORADOes_ES
dc.subject.otherAGRONÓMICAes_ES
dc.title“Producción de pepino (cucumis sativus.) con dos sistemas de tutorado”.es_ES
dc.typebachelorThesises_ES
Aparece en las colecciones: Tesis - Ingeniería Agronómica

Ficheros en este ítem:
Fichero Descripción Tamaño Formato  
UTC-PIM-000278.pdf2,75 MBAdobe PDFVisualizar/Abrir


Los ítems de Repositorio UTC están protegidos por copyright, con todos los derechos reservados, a menos que se indique lo contrario.