Por favor, use este identificador para citar o enlazar este ítem: http://repositorio.utc.edu.ec/handle/27000/7849
Registro completo de metadatos
Campo DC Valor Lengua/Idioma
dc.contributor.advisorPesantez, Gabriel-
dc.contributor.authorGrandes Zambrano, Johanna Lizette-
dc.contributor.authorLechon Carvajal, Edison José-
dc.date.accessioned2021-12-14T19:40:05Z-
dc.date.available2021-12-14T19:40:05Z-
dc.date.issued2021-03-
dc.identifier.citationGrandes Zambrano Johanna Lizette, Lechon Carvajal Edison José ( 2021); Optimización de la confiabilidad mediante la reconfiguración de circuitos primarios en la subestación Quevedo de CNEL EP. Unidad de negocio Santo Domingo. UTC. Latacunga. 83 p.es_ES
dc.identifier.otherPI-001669-
dc.identifier.urihttp://repositorio.utc.edu.ec/handle/27000/7849-
dc.descriptionThis research work deals with the reliability analysis in the feeders belonging to the Quevedo substation of CNEL EP, in order to establish the circuits with the highest number of electrical power interruptions to submit them to a reconfiguration analysis, using historical data from the last three years, where Pareto analysis is used to determine the percentage of interruptions that most affect each feeder. As a starting point, the information is classified by type of failure and duration, to determine the rate of failure and repair, availability (A) and unavailability (U) of the feeders, data with which it is possible to calculate the failure rates. reliability. From these results, the reconfiguration of circuit 6 is analyzed, since it presents the lowest indices. Using the Monte Carlo simulation in the MATLAB software package, it will be possible to determine the failure times and repair times in each section of the feeder. Applying the theory of graphs, the section with failure (disconnected) and the possible reconnection from neighboring nodes are determined, considering as a restriction the chargeability of the lines, that the repair time is less than the maneuvering time for a possible reconnection. This will allow new reliability indices to be calculated before and after reconfiguration during a prudent analysis time, allowing the optimal path to be identified.es_ES
dc.description.abstractEl presente trabajo de investigación trata sobre el análisis de confiabilidad en los alimentadores pertenecientes a la subestación Quevedo de CNEL EP, con el fin de establecer los circuitos con mayor número de interrupciones de energía eléctrica para someterlos a un análisis de reconfiguración, utilizando datos históricos de los tres últimos años, donde se utiliza el análisis de Pareto para determinar el porcentaje de interrupciones que más inciden en cada alimentador. Como punto de partida se clasifica la información por tipo de falla y duración, para determinar la tasa de falla y reparación, disponibilidad (A) e indisponibilidad (U) de los alimentadores, datos con los cuales es posible realizar el cálculo de los índices de confiabilidad. De estos resultados se analiza la reconfiguración del circuito 6, ya que presenta los índices más bajos. Mediante la simulación de Monte Carlo en el paquete informático de MATLAB, se podrá determinar los tiempos de falla y tiempos de reparación en cada tramo del alimentador. Aplicando la teoría de grafos se determina el tramo con falla (desconectado) y la posible reconexión desde los nodos vecinos, considerando como restricción la cargabilidad de las líneas, que el tiempo de reparación sea menor al tiempo de maniobra para una posible reconexión. Esto permitirá calcular nuevos índices de confiabilidad antes y después de la reconfiguración durante un tiempo prudente de análisis, permitiendo identificar la ruta óptima.es_ES
dc.format.extent83 páginases_ES
dc.language.isospaes_ES
dc.publisherEcuador: Latacunga: Universidad Técnica de Cotopaxi; UTC.es_ES
dc.rightsopenAccesses_ES
dc.rights.urihttp://creativecommons.org/licenses/by-nc-sa/3.0/ec/es_ES
dc.subjectCONFIABILIDAD EN DISTRIBUCIÓNes_ES
dc.subjectPROBABILIDADes_ES
dc.subjectTASA DE REPARACIÓNes_ES
dc.subjectTASA DE FALLAes_ES
dc.subject.otherINGENIERÍA ELÉCTRICAes_ES
dc.titleOptimización de la confiabilidad mediante la reconfiguración de circuitos primarios en la subestación Quevedo de CNEL EP. Unidad de negocio Santo Domingo.es_ES
dc.typebachelorThesises_ES
Aparece en las colecciones: Tesis - Ingeniería Eléctrica

Ficheros en este ítem:
Fichero Descripción Tamaño Formato  
PI-001669.pdfPROYECTO DE GRADO A TEXTO COMPLETO1,91 MBAdobe PDFVisualizar/Abrir


Este ítem está sujeto a una licencia Creative Commons Licencia Creative Commons Creative Commons