Por favor, use este identificador para citar o enlazar este ítem: http://repositorio.utc.edu.ec/handle/27000/9305
Registro completo de metadatos
Campo DC Valor Lengua/Idioma
dc.contributor.advisorProaño Maldonado, Xavier Alfonso-
dc.contributor.authorBarahona Vaca, Edgar Geovanny-
dc.contributor.authorBonilla Ramírez, Gabriela Alejandra-
dc.date.accessioned2022-12-14T21:03:15Z-
dc.date.available2022-12-14T21:03:15Z-
dc.date.issued2022-03-
dc.identifier.citationBarahona Vaca Edgar Geovanny, Bonilla Ramírez Gabriela Alejandra (2022); Evaluación del funcionamiento de la protección diferencial 87 en transformadores monofásicos ante presencia de fallas, mediante un prototipo didáctico. UTC. Latacunga. 168 p.es_ES
dc.identifier.otherPI-002139-
dc.identifier.urihttp://repositorio.utc.edu.ec/handle/27000/9305-
dc.descriptionIn this paper, the construction process of the didactic prototype that allows to evaluate the operation of the differential protection 87 was performed, by means of the parameterization of variables, is compiled. The module uses different components, among which the single-phase transformer stands out as the protected element. In this way, by means of the different elements that integrate the didactic prototype, it is possible to establish the conditions for the performance of the differential protection function 87. For this purpose, several parameters are considered, such as the minimum operating current, the starting current or the operating slope, which, together with the measured data, such as the primary and secondary current, which in turn make it possible to determine the value corresponding to the differential current, have made it possible to emulate the differential protection function 87 and it´s percentage variant. To achieve the above, current sensors of the Arduino brand were used, which together with the Nano microprocessor, of the same brand, will allow data collection, which after processing, will be communicated to LabVIEW where are constant is used, which allows scaling the values obtained in order to develop the programming logic that allows the entry of parameters, selection of CT´s, calculation of the differential and minimum operating current, as well as the identification of the opera9tion zones. Finally, the corresponding documents that allow the interaction with the didactic prototype were elaborated, these are the user´s guide and the practical guide, which allow the user to use the module in an adequate way.es_ES
dc.description.abstractEn el presente trabajo, se realizó la construcción de un prototipo didáctico que permite evaluar el funcionamiento de la protección diferencial 87, mediante la parametrización de variables. El módulo emplea diferentes componentes entre los que destaca el transformador monofásico, el cual se constituye como el elemento protegido, de esta forma mediante los distintos elementos que integran el prototipo didáctico se logra establecer las condiciones para la actuación de la función de protección diferencial 87. Para ello, se consideran varios parámetros, como la corriente mínima de operación, la corriente de arranque o la pendiente de operación, los cuales conjuntamente con los datos medidos, como la corriente el primario y secundario, que, a su vez, posibilitan determinar el valor correspondiente a la corriente diferencial, han permitido emular la función de protección diferencial 87 y su variante porcentual. Para lograr lo anteriormente expuesto, se empleó sensores de corriente de la marca Arduino, los cuales en conjunto con el microprocesador Nano, de la misma marca, permitirá la toma de datos, lo cuales tras su procesamiento, serán comunicados a LabVIEW donde se emplea una constante, la cual permite escalar los valores obtenidos para así, poder desarrollar la lógica de programación que permite el ingreso de parámetros, selección de TC’s, cálculo de la corriente diferencial y mínima de operación, así como también la identificación de las zonas de operación. Finalmente, se elaboró los documentos correspondientes que permiten la interacción con el prototipo didáctico, estos son la guía de usuario y la guía práctica, los cuales permiten al usuario emplear de forma adecuada el módulo.es_ES
dc.format.extent168 páginases_ES
dc.language.isospaes_ES
dc.publisherEcuador: Latacunga: Universidad Técnica de Cotopaxi (UTC)es_ES
dc.rightsopenAccesses_ES
dc.rights.urihttp://creativecommons.org/licenses/by-nc-sa/3.0/ec/es_ES
dc.subjectPROTOTIPOes_ES
dc.subjectPROTECCIÓN DIFERENCIAL 87es_ES
dc.subjectPARAMETRIZACIÓNes_ES
dc.subjectINGRESO DE PARÁMETROSes_ES
dc.subject.otherELÉCTRICAes_ES
dc.subject.otherPOTENCIAes_ES
dc.titleEvaluación del funcionamiento de la protección diferencial 87 en transformadores monofásicos ante presencia de fallas, mediante un prototipo didácticoes_ES
dc.typebachelorThesises_ES
Aparece en las colecciones: Tesis - Ingeniería Eléctrica

Ficheros en este ítem:
Fichero Descripción Tamaño Formato  
PI-002139.pdfPROYECTO DE GRADO A TEXTO COMPLETO5,41 MBAdobe PDFVisualizar/Abrir


Los ítems de Repositorio UTC están protegidos por copyright, con todos los derechos reservados, a menos que se indique lo contrario.