Por favor, use este identificador para citar o enlazar este ítem: http://repositorio.utc.edu.ec/handle/27000/9338
Registro completo de metadatos
Campo DC Valor Lengua/Idioma
dc.contributor.advisorProaño Maldonado, Xavier Alfonso-
dc.contributor.authorLópez Bautista, Edison Xavier-
dc.contributor.authorNúñez Aldaz, Diego Fabricio-
dc.date.accessioned2023-01-11T14:03:27Z-
dc.date.available2023-01-11T14:03:27Z-
dc.date.issued2022-03-
dc.identifier.citationLópez Bautista Edison Xavier, Núñez Aldaz Diego Fabricio (2022); Simulación en Homer de un sistema eléctrico híbrido solar -eólico en la parroquia Lasso de la provincia de Cotopaxi. UTC. Latacunga. 151 p.es_ES
dc.identifier.otherPI-002157-
dc.identifier.urihttp://repositorio.utc.edu.ec/handle/27000/9338-
dc.descriptionWithin present research work was made a 8,784 analysis provided data by the Cotopaxi Higher Technological Institute, through which were simulated a hybrid solar-wind system, whose was dimensioned by using Matlab Ra 2020 and PVsyst 7.2, for later, it is compared with the Homer Pro 3.14.2 simulator. For wind system analysis was used two simulators (WROPLOT 8.0.2 and Matlab Ra 2020), the first one indicates the wind rose, what shows the direction, which is directed the wind, with Matlab Ra 2020, it was analyzed the Weibull distribution to find out how often a wind speed is repeated into a given hour, further, knowing the existing electricity amount into area with an 884 [kWh/year] value and distances, what it is located one wind turbine from the other. Through the PVsyst 7.2 simulator was dimensioned the photovoltaic system for this simulation, it was necessary to know the azimuth angle, which refers to the photovoltaic panels inclination. With the simulator help was got 26 panels in series and 345 panels into parallel, what will have were got the photovoltaic park, as well as, the different distances, which is located each one and an 6 [GWh/year] electrical energy amount, what arrives to be generated into sector. The Homer Pro 3.14.2 simulator determined the electrical energy supplied by the solar-wind hybrid system with an 6,126,060 [kWh/year] amount, the got data from different simulated systems arre compared and it is appreciated, which they have similarity with respect to the got results in the simulator. Finally, it was made the economic technical assessment, in order to determine the initial investment value, what is $3,655,570.61 that was needed to build the hybrid solar-wind plant, as well as, to identify the NPV parameters with an $1,974,045.15, IRR amount with a 17.39% value and a initial investment return period in the 7 year, further to make a summary table, which issued the results by each of simulations.es_ES
dc.description.abstractEn el presente trabajo de investigación se realizó un análisis de 8 784 datos brindados por el Instituto Tecnológico Superior Cotopaxi mediante el cual se simulo un sistema híbrido solar - eólico el cual fue dimensionado mediante Matlab Ra 2020 y PVsyst 7.2 para luego ser comparado con el simulador Homer Pro 3.14.2. Para el análisis del sistema eólico, se utilizó dos simuladores (WROPLOT 8.0.2 y Matlab Ra 2020), el primero indica la rosa de los vientos la cual muestra la dirección en la que se dirige el viento, con Matlab Ra 2020, se analizó la distribución de Weibull para conocer con qué frecuencia se repite una velocidad del viento en una hora determinada, además, de conocer la cantidad de energía eléctrica existente en la zona con un valor de 884 [kWh/año] y distancias en las que se ubica un aerogenerador del otro. Mediante el simulador PVsyst 7.2, se dimensionó el sistema fotovoltaico para esta simulación fue necesario conocer el ángulo de azimut el cual hace referencia a la inclinación de los paneles fotovoltaicos. Con la ayuda del simulador se obtuvo 26 paneles en serie y 345 paneles en paralelo que tendrá el parque fotovoltaico, así como también las diferentes distancias a las cuales se ubica cada uno y una cantidad de energía eléctrica de 6 [GWh/año] que llega a generarse en el sector. El simulador Homer Pro 3.14.2, se determinó la energía eléctrica que suministra el sistema híbrido solar – eólico con una cantidad de 6 126 060 [kWh/año], se compara los datos obtenidos de los distintos sistemas simulados y se aprecia que tienen similitud con respecto a los resultados obtenidos en el simulador. Finalmente, se realizó la evaluación técnica económica con el fin de determinar el valor de la inversión inicial que es de $ 3 655 570,61 que se necesitara para construir la planta híbrida solar – eólica, así como también identificar los parámetros VAN con una cantidad de $1 974 045,15, TIR con un valor de 17,39% y un periodo de retorno de la inversión inicial en el año 7, además, de realizar un cuadro resumen en el cual consta los resultados emitidos por cada una de las simulaciones.es_ES
dc.format.extent151 páginases_ES
dc.language.isospaes_ES
dc.publisherEcuador: Latacunga: Universidad Técnica de Cotopaxi (UTC)es_ES
dc.rightsopenAccesses_ES
dc.rights.urihttp://creativecommons.org/licenses/by-nc-sa/3.0/ec/es_ES
dc.subjectFRECUENCIAes_ES
dc.subjectRADIACIÓN SOLARes_ES
dc.subjectVELOCIDAD DEL VIENTOes_ES
dc.subjectDISTRIBUCIÓN DE WEIBULLes_ES
dc.subject.otherELÉCTRICAes_ES
dc.subject.otherPOTENCIAes_ES
dc.titleSimulación en Homer de un sistema eléctrico híbrido solar -eólico en la parroquia Lasso de la provincia de Cotopaxies_ES
dc.typebachelorThesises_ES
Aparece en las colecciones: Tesis - Ingeniería Eléctrica

Ficheros en este ítem:
Fichero Descripción Tamaño Formato  
PI-002157.pdfPROYECTO DE GRADO A TEXTO COMPLETO6,03 MBAdobe PDFVisualizar/Abrir


Los ítems de Repositorio UTC están protegidos por copyright, con todos los derechos reservados, a menos que se indique lo contrario.