Por favor, use este identificador para citar o enlazar este ítem: http://repositorio.utc.edu.ec/handle/27000/9785
Tipo de Material: bachelorThesis
Título : Análisis del impacto de la integración fotovoltaica en los sistemas de iluminación
Autor : Andrango Quilumbaquin, Geovanny Germán
Zapata Broncano, Paúl Geovanny
Director de Tesis: Pesántez Palacios, Gabriel Napoleón
Descriptores: SISTEMA DE ILUMINACIÓN
PERTURBACIONES
LUMINOSIDAD
SISTEMA FOTOVOLTAICO
Fecha de publicación : 2022
Ciudad: Editorial: Ecuador: Latacunga: Universidad Técnica de Cotopaxi (UTC)
Citación : Andrango Quilumbaquin Geovanny German, Zapata Broncano Paul Geovanny (2022); Análisis del impacto de la integración fotovoltaica en los sistemas de iluminación. UTC. Latacunga. 112 p.
metadata.dc.format.extent: 112 páginas
Resumen : En el presente proyecto de investigación se realiza el análisis de la integración fotovoltaica en los sistemas de iluminación mediante mediciones de laboratorio y simulaciones en los softwares DIALux Evo y ETAP 20.1, aplicando normativas como: Regulación Nro. ARCERNNR 006/20, Regulación Nro. ARCONEL 003/18, IEEE Standard 519-2014, IEC Standard 61000-3-2, entre otras. En primera instancia se realizó una investigación bibliográfica sobre la integración fotovoltaica en los sistemas de iluminación, posteriormente se buscó información sobre el plano georreferenciado del parque central de la parroquia Tanicuchi con medidas reales, se instaló una lámpara LED de 150 W para obtener datos de luminosidad con el luxómetro y perturbaciones con el analizador de redes. Además, se planteó tres casos de estudio que consisten en diseñar el sistema de iluminación LED en el software DIALux Evo, dimensionamiento del sistema fotovoltaico conectado a la red capaz de cubrir la demanda generada por el sistema y el análisis de perturbaciones en el software ETAP 20.1. Además, se propone soluciones para mitigar perturbaciones generadas por las lámparas LED.
Descripción : In the present research project, the analysis of photovoltaic integration in lighting systems is carried out through laboratory measurements and simulations in DIALux Evo and ETAP 20.1 software, applying standards such as: Regulation No. ARCERNNR 006/20, ARCONEL 003/18, IEEE Standard 519-2014, IEC Standard 61000-3-2, among others. In the first instance, bibliographic research was carried out on photovoltaic integration in lighting systems. Subsequently, information was sought on the georeferenced plan of the central park of the Tanicuchi parish with real measurements, a 150 W LED lamp was installed to obtain luminosity data with the lux meter and disturbances with the network analyzer. Then three case studies were proposed that consist of designing the LED lighting system in the DIALux Evo software, sizing of the photovoltaic system connected to the grid capable of covering the demand generated by the system and the analysis of disturbances in the ETAP 20.1 software. In addition, solutions are proposed to mitigate disturbances generated by LED lamps.
Aparece en las colecciones: Tesis - Ingeniería Eléctrica

Ficheros en este ítem:
Fichero Descripción Tamaño Formato  
PI-002289.pdfPROYECTOS DE GRADO A TEXTO COMPLETO5,49 MBAdobe PDFVisualizar/Abrir


Los ítems de Repositorio UTC están protegidos por copyright, con todos los derechos reservados, a menos que se indique lo contrario.