Por favor, use este identificador para citar o enlazar este ítem: http://repositorio.utc.edu.ec/handle/27000/6860
Tipo de Material: bachelorThesis
Título : Implementación de un Sistema de Monitoreo de Caudal de Río San Pablo.
Autor : Chusin Lisintuña, William Rolando
Pilaguano Vega, Jonathan Javier
Director de Tesis: Camacho Reina, Aurelio Gregorio, Mgr.
Descriptores: ENERGÍA ELÉCTRICA
INTERNET
GATEWAY
SISTEMA DE MONITOREO
Fecha de publicación : feb-2020
Ciudad: Editorial: Ecuador : La Maná : Universidad Técnica de Cotopaxi
Citación : Chusin Lisintuña, W. R., Pilaguano Vega, J. J., (2020); Implementación de un Sistema de Monitoreo de Caudal de Río San Pablo. La Maná : Universidad Técnica de Cotopaxi; Facultad de Ciencias de la Ingeniería y Aplicadas; Ingeniero en Informática y Sistemas Computacionales
metadata.dc.format.extent: 71 páginas
Resumen : La presente investigación consiste en la implementación de un sistema de monitoreo del caudal en el río San Pablo. Para la realización del mismo se procedió inicialmente a realizar un mapeo de los niveles de caudal en distintas partes a lo largo del río en diferentes momentos. Con lo anterior se pudo observar que eran realmente usuales los desbordamientos, los que se hacían más intensos en los meses del año correspondientes al invierno. Con el objetivo de monitorear estos valores de caudal se instalan en una zona lo bastante distante y en ascenso por el río, los sensores que son los encargados de medir dicho nivel y almacenar esta información en una nube destinada con este fin. Se realizaron mediciones de la velocidad y caudal del Río San Pablo a una distancia aproximada de 5 km de manera ascendente en el curso del río. Estas mediciones permitieron realizar una evaluación del comportamiento del río y hacer un estimado del tiempo de recorrido de un posible golpe de agua. Se siguieron dos metodologías para la realización de estas mediciones; La primera consistió en el diseño de un dispositivo formado principalmente por un fluviómetro para obtener los valores de velocidad del agua, y una tarjeta de arduino que procesa y visualiza dichos datos. El segundo método se basa en la utilización de una aplicación móvil que da un estimado de la velocidad de un flujo natural de agua. Para el posicionamiento de los sensores en sus respectivas ubicaciones se tuvieron varios parámetros en cuanta como fueron la disposición de energía eléctrica e internet para el Gateway, y el alcance los sensores por parte de este. Los datos recuperados por los sensores son almacenados en un espacio en la nube que ya cuenta con las políticas de seguridad necesarias para restringir el acceso a estos. Además, también cuenta con una interfaz WEB que permite visualizar el valor actual del caudal en cada momento desde la instalación de dichos sensores.
Descripción : This research consists in the implementation of a flow monitoring system in the San Pablo river. To carry out the same, the flow levels were initially mapped in different parts along the river at different times. With the above it was observed that overflows were really common, which became more intense in the months of the year corresponding to winter. In order to monitor these flow values, the sensors that are in charge of measuring this level and storing this information in a cloud destined for this purpose are installed in an area quite distant and rising up the river. Measurements of the speed and flow of the San Pablo River were made at an approximate distance of 5 km upwards in the course of the river. These measurements allowed an evaluation of the behavior of the river and an estimate of the travel time of a possible water strike. Two methodologies were followed to perform these measurements; The first consisted of the design of a device formed mainly by a flowmeter to obtain the water velocity values, and an arduino card that processes and visualizes said data. The second method is based on the use of a mobile application that gives an estimate of the speed of a natural water flow. For the positioning of the sensors in their respective locations, several parameters were taken into account, such as the availability of electricity and internet for the Gateway, and the range of the sensors by the Gateway. The data recovered by the sensors is stored in a space in the cloud that already has the necessary security policies to restrict access to them. In addition, it also has a WEB interface that allows you to visualize the current value of the flow rate at any time from the installation of these sensors.
Aparece en las colecciones: Tesis - Ingeniería en Informática y Sistemas Computacionales

Ficheros en este ítem:
Fichero Descripción Tamaño Formato  
UTC-PIM-000227.pdf2,24 MBAdobe PDFVisualizar/Abrir


Los ítems de Repositorio UTC están protegidos por copyright, con todos los derechos reservados, a menos que se indique lo contrario.