Por favor, use este identificador para citar o enlazar este ítem: http://repositorio.utc.edu.ec/handle/27000/7858
Tipo de Material: bachelorThesis
Título : “Diseño del sistema eléctrico de la planta procesadora de lácteos (MILMA LAC) ubicada en el Cantón Montufar Provincia del Carchi”
Autor : Espinoza Zamora, Juan Rodrigo
Cisneros Cherres, Edgar Adrián
Director de Tesis: Vásquez, Franklin
Descriptores: LUMINARIAS LED
LLAVES TERMO MAGNÉTICAS
SOBRE VOLTAJES
Fecha de publicación : mar-2021
Ciudad: Editorial: Ecuador: Latacunga: Universidad Técnica de Cotopaxi (UTC)
Citación : Espinoza Zamora Juan Rodrigo, Cisneros Cherres Edgar Adrián (2021); “Diseño del sistema eléctrico de la planta procesadora de lácteos (MILMA LAC) ubicada en el Cantón Montufar Provincia del Carchi”. UTC. Latacunga. 144 p.
metadata.dc.format.extent: 144 páginas
Resumen : Este proyecto se basa en etapas específicas del plan de estudio y diseño, en donde parte de la recopilación de una base teórica conlleva al estudio y análisis para una selección de los elementos que conforman el nuevo sistema eléctrico de medio y bajo voltaje cada elemento de la red como conductores, protecciones, capacidad de alimentación, malla a tierra entre otros. Se empezara calculando la demanda total de la carga eléctrica basándose en requerimientos eléctricos de la industria luego se procederá a un análisis de la nueva área en la cual se distribuirán los diferentes circuitos de media y baja tensión dando paso a la planificación de acuerdo a los planos entregados por el propietario de la planta posteriormente se procederá con la selección de acuerdo a las características técnicas de los elementos como conductores llaves termo magnéticas, tableros de distribución y demás elementos que encajen con un presupuesto aceptable para el proyecto, basándonos en las normativas y reglamentos del MEER el nuevo diseño eléctrico tendrá la capacidad de soportar cargas futuras que permitirán crecer a la empresa y garantizar la productividad de la misma, el nuevo sistema eléctrico también contara con el sistema de puesta a tierra que evitara que sobretensiones o fugas de corrientes dañen la vida útil de los equipos y maquinaria que intervengan en los distintos procesos de producción además de contar con una cámara de transformación que garantizara la alimentación de energía eléctrica a los diferentes circuitos, la misma que estará en condiciones de soportar un aumento de carga planificada a futuro al realizar este proyecto se pretende que la empresa Milma Lac cuente con un sistema de electrificación con los más altos estándares de seguridad y confiabilidad.
Descripción : Franklin Hernán Vásquez Teneda This project research is focused on specific stages of the study and design plan, where part of the compilation of a theoretical basis leads to the study and analysis for a selection of the elements that make up the new medium and low voltage electrical system, each element of the network such as conductors, protections, power capacity, ground mesh among others. It will begin by calculating the total demand of the electrical load based on the electrical requirements of the industry, then an analysis of the new area will be carried out in which the different medium and low voltage circuits will be distributed, giving way to planning according to the plans Delivered by the owner of the plant, subsequently, the selection will proceed according to the technical characteristics of the elements such as conductors, thermo magnetic keys, distribution boards and other elements that fit with an acceptable budget for the project, based on the rules and regulations of the MEER the new electrical design will have the ability to support future loads that will allow the company to grow and guarantee its productivity, the new electrical system will also have a grounding system that will prevent overvoltages or current leakage from damaging the useful life of the equipment and machinery involved in the different production processes in addition to having a transformation chamber that will guarantee the supply of electrical energy to the different circuits, which will be in a position to support an increase in planned load in the future when carrying out this project, it is intended that the Milma Lac company count with an electrification system with the highest standards of safety and reliability.
Aparece en las colecciones: Tesis - Ingeniería Eléctrica

Ficheros en este ítem:
Fichero Descripción Tamaño Formato  
PI-001677.pdfPROYECTO DE GRADO A TEXTO COMPLETO17,54 MBAdobe PDFVisualizar/Abrir


Este ítem está sujeto a una licencia Creative Commons Licencia Creative Commons Creative Commons