Por favor, use este identificador para citar o enlazar este ítem: http://repositorio.utc.edu.ec/handle/27000/9270
Registro completo de metadatos
Campo DC Valor Lengua/Idioma
dc.contributor.advisorGuamán Cuenca, Wilian Patricio-
dc.contributor.authorCalle Guaña, John Henry-
dc.date.accessioned2022-12-14T14:11:40Z-
dc.date.available2022-12-14T14:11:40Z-
dc.date.issued2022-03-
dc.identifier.citationCalle Guaña John Henry (2022); Análisis de sobretensiones en la línea de extra alta tensión a 500 kv del sistema nacional interconectado de Ecuador mediante la herramienta de simulación Atp Draw. UTC. Latacunga. 162 p.es_ES
dc.identifier.otherPI-002133-
dc.identifier.urihttp://repositorio.utc.edu.ec/handle/27000/9270-
dc.descriptionThe research project proposes a model of the 500 kV transmission system of the National Interconnected System, including the Ecuador-Peru interconnection and the future Pasaje-Santiago transmission system to evaluate temporary overvoltages (TOV), maneuver (SOV) and associated with atmospheric discharges (LOV), which could be produced by internal or external events in the network. After that, based on the infrastructure exposed in the Transmission Expansion Plan and on the insulation coordination criteria presented in the IEC 60071-1, IEC 60071-2, IEC 60071-4, and IEEE Std 1313 standards, the construction of the model was carried out in the ATP Draw software. Then, the amplitudes of the overvoltage are under different operating scenarios were evaluated and these magnitudes were compared with the reference levels of the insulation used in the 500kV system.es_ES
dc.description.abstractEl presente proyecto de investigación propone un modelo del sistema de transmisión a 500 kV del Sistema Nacional Interconectado incluyendo la interconexión Ecuador-Perú y el futuro sistema de transmisión Pasaje-Santiago, con el propósito de evaluar las sobretensiones temporales (TOV), de maniobra (SOV) y asociadas a descargas atmosféricas (LOV), que podrían producirse por eventos internos o externos en la red. Basándose en la infraestructura expuesta en el Plan de Expansión de la Transmisión y en los criterios de coordinación de aislamiento presentados en las normativas IEC 60071-1, IEC 60071-2, IEC 60071-4 e IEEE Std 1313, se realizó la construcción del modelo de red en el software ATP Draw. Luego, se evaluaron las amplitudes de las sobretensiones bajo diferentes escenarios de operación y se compararon dichas magnitudes con los niveles referenciales del aislamiento utilizado en el sistema de 500kV.es_ES
dc.format.extent162 páginases_ES
dc.language.isospaes_ES
dc.publisherEcuador: Latacunga: Universidad Técnica de Cotopaxi (UTC)es_ES
dc.rightsopenAccesses_ES
dc.rights.urihttp://creativecommons.org/licenses/by-nc-sa/3.0/ec/es_ES
dc.subjectINTERCONEXIÓNes_ES
dc.subjectRESISTENCIA DE AISLAMIENTOes_ES
dc.subjectSOBRETENSIONES REPRESENTATIVASes_ES
dc.subjectRIESGO DE FALLAes_ES
dc.subject.otherELÉCTRICAes_ES
dc.titleAnálisis de sobretensiones en la línea de extra alta tensión a 500 kv del sistema nacional interconectado de Ecuador mediante la herramienta de simulación Atp Drawes_ES
dc.typebachelorThesises_ES
Aparece en las colecciones: Tesis - Ingeniería Eléctrica

Ficheros en este ítem:
Fichero Descripción Tamaño Formato  
PI-002133.pdfPROYECTO DE GRADO A TEXTO COMPLETO5,6 MBAdobe PDFVisualizar/Abrir


Los ítems de Repositorio UTC están protegidos por copyright, con todos los derechos reservados, a menos que se indique lo contrario.