Por favor, use este identificador para citar o enlazar este ítem: http://repositorio.utc.edu.ec/handle/27000/9270
Tipo de Material: bachelorThesis
Título : Análisis de sobretensiones en la línea de extra alta tensión a 500 kv del sistema nacional interconectado de Ecuador mediante la herramienta de simulación Atp Draw
Autor : Calle Guaña, John Henry
Director de Tesis: Guamán Cuenca, Wilian Patricio
Descriptores: INTERCONEXIÓN
RESISTENCIA DE AISLAMIENTO
SOBRETENSIONES REPRESENTATIVAS
RIESGO DE FALLA
Fecha de publicación : mar-2022
Ciudad: Editorial: Ecuador: Latacunga: Universidad Técnica de Cotopaxi (UTC)
Citación : Calle Guaña John Henry (2022); Análisis de sobretensiones en la línea de extra alta tensión a 500 kv del sistema nacional interconectado de Ecuador mediante la herramienta de simulación Atp Draw. UTC. Latacunga. 162 p.
metadata.dc.format.extent: 162 páginas
Resumen : El presente proyecto de investigación propone un modelo del sistema de transmisión a 500 kV del Sistema Nacional Interconectado incluyendo la interconexión Ecuador-Perú y el futuro sistema de transmisión Pasaje-Santiago, con el propósito de evaluar las sobretensiones temporales (TOV), de maniobra (SOV) y asociadas a descargas atmosféricas (LOV), que podrían producirse por eventos internos o externos en la red. Basándose en la infraestructura expuesta en el Plan de Expansión de la Transmisión y en los criterios de coordinación de aislamiento presentados en las normativas IEC 60071-1, IEC 60071-2, IEC 60071-4 e IEEE Std 1313, se realizó la construcción del modelo de red en el software ATP Draw. Luego, se evaluaron las amplitudes de las sobretensiones bajo diferentes escenarios de operación y se compararon dichas magnitudes con los niveles referenciales del aislamiento utilizado en el sistema de 500kV.
Descripción : The research project proposes a model of the 500 kV transmission system of the National Interconnected System, including the Ecuador-Peru interconnection and the future Pasaje-Santiago transmission system to evaluate temporary overvoltages (TOV), maneuver (SOV) and associated with atmospheric discharges (LOV), which could be produced by internal or external events in the network. After that, based on the infrastructure exposed in the Transmission Expansion Plan and on the insulation coordination criteria presented in the IEC 60071-1, IEC 60071-2, IEC 60071-4, and IEEE Std 1313 standards, the construction of the model was carried out in the ATP Draw software. Then, the amplitudes of the overvoltage are under different operating scenarios were evaluated and these magnitudes were compared with the reference levels of the insulation used in the 500kV system.
Aparece en las colecciones: Tesis - Ingeniería Eléctrica

Ficheros en este ítem:
Fichero Descripción Tamaño Formato  
PI-002133.pdfPROYECTO DE GRADO A TEXTO COMPLETO5,6 MBAdobe PDFVisualizar/Abrir


Los ítems de Repositorio UTC están protegidos por copyright, con todos los derechos reservados, a menos que se indique lo contrario.